View NUP4000_4579717.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NUP4000 Bi-directional TVS Array for High-Speed Data Line Protection
The NUP4000 transient voltage suppressor is designed to protect equipment attached to up to four high speed communication lines from ESD, EFT, and lightning.
Features: http://onsemi.com
* SO-8 Package * Peak Power - 400 W 8 x 20 mS * ESD Rating:
* * * * * * * * * *
IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-4 (EFT) 40 A (5/50 ns) IEC 61000-4-5 (lightning) 12 A (8/20 ms) UL Flammability Rating of 94 V-0 These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant High Speed Communication Line Protection 15 V Data and I/O Lines Microprocessor Based Equipment LAN/WAN Equipment Servers Notebook and Desktop PC Serial and Parallel Ports Peripherals
SO-8 VOLTAGE SUPPRESSOR 400 WATTS PEAK POWER 15 VOLTS
PIN CONFIGURATION AND SCHEMATIC
1 2 3 4 8 7 6 5
Typical Applications:
8 1 SO-8 CASE 751
MAXIMUM RATINGS
Rating Peak Power Dissipation 8 x 20 ms @ TA = 25C (Note 1) Peak Pulse Current 8 x 20 ms @ TA = 25C (Note 1) Junction and Storage Temperature Range Lead Solder Temperature - Maximum 10 Seconds Duration Symbol Ppk IPP TJ, Tstg TL Value 400 10 -55 to +150 260 Unit W A 1 C C A Y WW G = Assembly Location = Year = Work Week = Pb-Free Package
MARKING DIAGRAM
8 NUP40 AYWWG G
1. Non-repetitive current pulse 8 x 20 mS exponential decay waveform
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device NUP4000DR2G Package SO-8 (Pb-Free) Shipping 2500 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
(c) Semiconductor Components Industries, LLC, 2009
August, 2009 - Rev. 0
1
Publication Order Number: NUP4000/D
NUP4000
ELECTRICAL CHARACTERISTICS
Characteristic Reverse Working Voltage Reverse Breakdown Voltage @ It = 1.0 mA Reverse Leakage Current @ VRWM = 15 Volts Maximum Clamping Voltage @ IPP = 1.0 A, 8 x 20 mS Maximum Clamping Voltage @ IPP = 5.0 A, 8 x 20 mS Maximum Peak Pulse Current Junction Capacitance @ VR = 0 V, f = 1 MHz Symbol VRWM VBR IR VC VC IPP CJ Min - 16.7 N/A N/A N/A - - Typ - - - - - - - Max 15 - 1.0 24 30 10 75 Unit V V mA V V A pF
1000 Ppk, PEAK SURGE POWER (WATTS) % OF PEAK PULSE CURRENT
100 90 80 70 60 50 40 30 20 10 0 0
tr
PEAK VALUE IRSM @ 8 ms PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms HALF VALUE IRSM/2 @ 20 ms
100
10 NOTE: Non-Repetitive Surge. 1
tP
1
10 t, TIME (ms)
100
1000
20
40 t, TIME (ms)
60
80
Figure 1. Pulse Width
Figure 2. 8 x 20 ms Pulse Waveform
http://onsemi.com
2
NUP4000
PACKAGE DIMENSIONS
SOIC-8 NB CASE 751-07 ISSUE AJ
-X- A
8 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDARD IS 751-07. DIM A B C D G H J K M N S MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0_ 8_ 0.25 0.50 5.80 6.20 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0_ 8_ 0.010 0.020 0.228 0.244
B
1
S
4
0.25 (0.010)
M
Y
M
-Y- G
K
C -Z- H D 0.25 (0.010)
M SEATING PLANE
N
X 45 _
0.10 (0.004)
M
J
ZY
S
X
S
SOLDERING FOOTPRINT*
1.52 0.060
7.0 0.275
4.0 0.155
0.6 0.024
1.270 0.050
SCALE 6:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
3
NUP4000/D

▲Up To Search▲

Price & Availability of NUP4000

	To Download NUP4000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .